Malidaプラスチック調節可能なフロートバルブfor水族館水フィルター逆浸透システム fu01 人気ブレゼント! Malidaプラスチック調節可能なフロートバルブfor水族館水フィルター逆浸透システム fu01 人気ブレゼント! fu01,2657円,vlog.drruby.academy,産業・研究開発用品 , 空圧・油圧・配管 , 継手,Malidaプラスチック調節可能なフロートバルブfor水族館水フィルター逆浸透システム,/chloroplatinite1524445.html 2657円 Malidaプラスチック調節可能なフロートバルブfor水族館水フィルター逆浸透システム fu01 産業・研究開発用品 空圧・油圧・配管 継手 fu01,2657円,vlog.drruby.academy,産業・研究開発用品 , 空圧・油圧・配管 , 継手,Malidaプラスチック調節可能なフロートバルブfor水族館水フィルター逆浸透システム,/chloroplatinite1524445.html 2657円 Malidaプラスチック調節可能なフロートバルブfor水族館水フィルター逆浸透システム fu01 産業・研究開発用品 空圧・油圧・配管 継手

Malidaプラスチック調節可能なフロートバルブfor水族館水フィルター逆浸透システム fu01 人気ブレゼント 新着セール

Malidaプラスチック調節可能なフロートバルブfor水族館水フィルター逆浸透システム fu01

2657円

Malidaプラスチック調節可能なフロートバルブfor水族館水フィルター逆浸透システム fu01

スタイル:タイプ1、1/4インチ

Malidaプラスチック調節可能なフロートバルブfor水族館水フィルター逆浸透システム fu01

My brass RO float finally corroded through and since any metal except stainless is susceptible to being attacked by reverse osmosis (RO) water, this was the logical choice for a replacement for my RO tank.
Hey, this is a great item. I bought it to make a water supply for my Westie's. I purchased a stainless steel bread pan for $4 and mounted this to the side of it and then just attached some 1/4 inch tubing to the water line for our fridge and the dogs get fresh water all the time.. Very nice item. I only wish I had done this before purchasing a $40 water bowl as they get mold up under the mechanism and it's very hard to clean them.. With this all is out in the open so I can detect if any mold would start... So far, a month and no mold.
I don't use these for an aquarium. I am an avid armature gardener with an 8x10 greenhouse. I feed seedlings using a capillary matt. The matt is dipped into a drywall pan that must stay filled with water but the water must shut off when the pan is full. The float valve is mounted in the tank and connected to the water supply. It works perfectly. I have 4 of them installed.
It takes a little patience to do it, but I drilled a hole in the curved back of the reservoir to fit the float. I used a lighter to heat the arms on the float to bend them to fit. After about 10 minutes of tweaking, it fits perfect. I ran the plastic line through the back of the cabinets and through the counter top right behind the coffeemaker. I used the tee to connect to my filtered water and used the shut off valve inline. Now it fills automatically. I'm very happy with my purchase. Everything I needed was included minus teflon tape. 5 stars!